Home > GEARS & CENTERS > Rear End Yokes
Rear End Yokes.
Sort By:
Page of 1
Ford 9" 1350 28 Spline Yoke Spacer Ford 9" 1310 Short Narrow Forged Black Yoke Ford 9" 1330 Short Wide Rear End Yoke
Spacer to install a 1350 rear end yoke on a standard 9 inch Ford pinion support.

1350 yoke on a standard 9 inch Ford pinion support won't tighten up as bearings are narrower.

 		Ford 9" 1310 Short Narrow Forged Black Yoke
We suggest to also purchase the N1-0089L longer 1310 u bolts we sell
Uses 1310 series u joint - 3 7/32" wide with 1 1/16" OD caps (u joint not included).


 		Ford 9" 1330 Short Wide Rear End Yoke
  • U-joint that fits this yoke is a 1330 Cleveland, 1-1/8" cap x 3-5/8" across (not included).
  • cast yoke with dust shield
  • 4 1/4" total length center of u-joint ot end of yoke
Ford 9" 1330 Long Wide Rear End Yoke Ford 9" 1310 Short Narrow Forged Black Yoke Machined for a Daytona Pinion Support Daytona Ford 9" 1330 Long Wide Rear End Yoke
Ford 9" 1330 Long Wide Rear End Yoke
  • U-joint that fits this yoke is a 1330 Cleveland, 1-1/8" cap x 3-5/8" across (not included).
  • cast yoke with dust shield
  • 5.05" Total Length
  • This fits a stock style support (28 spline)
 		Ford 9" 1310 Short Narrow Forged Black Yoke Machined for a Daytona Pinion Support.

This yoke is shorter becayse the Dayton Pinion Support has a wider bearing
We suggest to also purchase the N1-0089L longer 1310 u bolts we sell.
Uses a 1310 series u-joint ( 3 7/32" wide with 1 1/16" outside diameter caps)

 		Ford 9" 1330 Long Wide Rear End Yoke for DAYTONA Pinon Support
  • U-joint that fits this yoke is a 1330 Cleveland, 1-1/8" cap x 3-5/8" across (not included).
  • cast yoke with dust shield
  • 5.05" Total Lenght
Chevy 12 Bolt 1350 Forged Yoke Dana 60 1350 Forged Yoke Ford 8.8" 1330 Forged Yoke 1-1/8" caps x 3-5/8" wide
Dana 60 1350 Forged Yoke
Our Price: $99.00
Free Shipping
Chevy 12 Bolt 1350 Forged Yoke
this yoke only fits a 12 bolt car rear end
fits 1350 series u-joint ( 3 5/8" wide x 1 3/16" outside diamater cap)


 		Dana 60 1350 Black Forged Yoke
  • 29 spline
  • 1350 u-joint size
  • 3.625" snap ring span
  • 1.188" cap diameter
  • Outside snap ring design


 		Ford 8.8" 1330 Forged Yoke 1-1/8" caps x 3-5/8" wide
Ford 8.8" 1350 Forged Yoke Ford 9" 1350 28 Spline Forged Yoke Ford 9" 1350 35 Spline Forged Yoke
Ford 8.8" Rear End 1350 Forged Yoke
  • fits 1350 series u joint ( 3 5/8" wide x 1 3/16" caps)
  • comes with S3-94-18X 1350 Series u-bolts

 		Ford 9" 1350 28 Spline Forged Chrome Moly Yoke

fits 1350 series u-joints (3 5/8" wide x 1 3/16" OD caps)
manufactured to fit a Daytona Pinion Support and has dust shield.

 		Ford 9" 1350 35 Spline Forged Yoke.
1350 GM 10 Bolt 1350 Forged Yoke for 8.5" Ford 9" 1330 Black Forged Short Wide Rear End Yoke 1350 Chrysler 29 Spline Rear End Yoke
1350 GM 10 Bolt 1350 Forged Yoke
for 8.5" General Motors Rear End
Only fits Car rear ends

 		Ford 9" 1330 Black Forged Short Wide Rear End Yoke
  • U-joint that fits this yoke is a 1330 Cleveland, 1-1/8" cap x 3-5/8" across (not included).
  • Black forged yoke with dust shield
  • 4 1/4" total length center of u-joint ot end of yoke
 		1350 Chrysler Rear End Yoke 29 Spline
3 5/8" Wide x 1 3/16" Cap
7290 Chrysler 29 Spline Rear End Yoke 1410 Dana 60/70 29 spline Pinon Yoke GM14T 10.5" 1410 Pinion Yoke
7290 Chrysler Rear End Yoke 29 Spline
3 5/8" Wide x 1 1/8" Cap

 		Forged Yoke, fits Dana 60 / 70 / 70U / 70UHD 29 Spline Pinion
1410 U-Joint Series 		Forged 14 Bolt Truck GM 10.5" 1410 U-Bolt Pinion Yoke
**use 98' and down pinion seal
GM14T 10.5" 1350 Pinon Yoke Ford 9" 1350 28 Spline New BILLET Yoke Ford 9" 1350 35 Spline BILLET Yoke
1350 Series GM 10.5" 14 Bolt Truck Forged U-Bolt Pinon Yoke
**use 98' and down pinon seal 		Ford 9" 1350 28 Spline New BILLET Yoke
Chrome Moly

 		Chrome Moly Machined Billet Yoke for 35 spline large pinion
9" Ford fits 1350 Series u joint (3 5/8" wide x 1 3/16" caps)
2.1255" OD for seal surface
1350 Ford 10.25/10.5L 31 Spline Pinion Yoke 1410 Ford 10.25/10.5L 31 Spline Pinion Yoke GM14T 10.5" 1480 Pinon Yoke
Forged 31 Spline Ford F250/F350 Pinion Yoke for 10.25" and 10.5"
1350 U-Joint Series 		Forged 31 Spline Ford F250/F350 Pinion Yoke for 10.25" and 10.5"
1410 U-Joint Series 		Forged 1480 Series GM 10.5" 14 Bolt Truck U-Bolt Pinon Yoke
**use 98' and down pinon seal