Home > DRIVE SHAFTS > ALUMINUM DRIVE SHAFTS
ALUMINUM DRIVE SHAFTS

IF DRIVE SHAFT NOT SOLD WITH A SLIP YOKE, YOU CAN PURCHASE A SLIP YOKE AT THE SAME TIME AS YOUR DRIVE SHAFT PURCHASE AND WE WILL BUILD AND BALANCE THE ASSEMBLY.

Sort By:
Page of 1
3.0" OD Drive Shaft .125 wall Aluminum with 1310 U-Joints 3.5" OD Drive Shaft .114 wall Aluminum with 1330 U-Joints 1979-1995 V8 Mustang or 1979-2004 V6 Mustang with 28 spline slip yoke
3.0" OD X.125" wall Aluminum Drive Shaft with 1310 Greaseable U-Joints
  • specify length center to center
  • spicer greasable 1310 series u joints
purchase a transmission slip yoke and we will install the yoke and balance the drive shaft assembly.

3.5" OD X.114" wall Aluminum Drive Shaft with 1330 Solid U-Joints
specify length center to center
spicer solid 1330 series u joints


purchase a transmission slip yoke and we will install the yoke and balance the drive shaft assembly.

  • Drive Shaft, Aluminum Ford 1979-1995 V8 Mustang or 1979-2004 V6 Mustang
  • 3.5" OD 6061T aluminum x .114" wall tubing
  • 45.5" center to center on u-joints
  • Spicer 1330 series solid cross u-joint on the front and conversion u-joint on the rear
  • 28 spline slip yoke fits transmissions
  • Balanced Assembly

1996-2004 V8 Mustang with 31 spline slip yoke 3.5" OD Drive Shaft .114 wall Aluminum with 1350 U-Joints 3.0" OD Drive Shaft .125 wall Alum. with 8" Slip Yoke Installed
  • Drive Shaft, Aluminum For 1996-2004 V8 Mustang
  • 3.5" OD 6061T aluminum x .114" wall tubing
  • 45.5" center to center on u-joints
  • Spicer 1330 series solid cross u-joint on the front and conversion u-joint on the rear
  • 31 spline slip yoke fits transmissions
  • Balanced Assembly.
  • Please Note: This driveshaft will NOT fit on 1999-2004 Cobra Mustangs.
  • 3.5" OD X.114" wall Aluminum Drive Shaft with 1350 Solid U-Joints
  • specify length center to center
  • solid 1350 series u joints

purchase a transmission slip yoke and we will install the yoke and balance the drive shaft assembly.


3.0" OD X.125" wall Aluminum Drive Shaft with 1310 Greaseable U-Joints & 8" Extra Clearance Slip Yoke
  • specify length center to center
  • Spicer greasable 1310 series u joints
  • 8" Extra Clearance x 27 spline slip yoke
  • Slip yoke installed and balanced assembly
  • Great for Circle Track Racing.
4.0" OD Drive Shaft .087 wall Aluminum with 1350 U-Joints 3.5" OD Aluminum .125" wall Drive Shaft 1350 series 4.0" OD Drive Shaft .087 wall Aluminum with 1410 U-Joints
  • 4.0" OD X.087" wall Aluminum Drive Shaft with 1350 SOLID U-Joints
  • specify length center to center
  • solid 1350 series u joints

purchase a transmission slip yoke and we will install the yoke and balance the drive shaft assembly.


1350 Series 3.5" OD .125 wall Aluminum Drive Shaft
  • Aluminum .125" wall Drag Race Drive Shaft
  • Specify length; center to center on u-joints (up to 57.5" center to center)
  • 1350 Series
  • Cross U Joints
4.0" OD X.087" wall Aluminum Drive Shaft with 1410 SOLID U-Joints
specify length center to center
spicer SOLID 1410 series u joints


purchase a transmission slip yoke and we will install the yoke and balance the drive shaft assembly


4.0" OD Drive Shaft .125 wall Aluminum with 1350 U-Joints 1967-69 CAMARO / FIREBIRD Aluminum Drive Shaft 1982-2000 CAMARO / FIREBIRD Aluminum Drive Shaft
4.0" OD X.125" wall Aluminum Drive Shaft with 1350 Solid U-Joints
  • Specify length; center to center on u-joints (up to 60" center to center)
  • Solid 1350 series u joints.
purchase a transmission slip yoke and we will install the yoke and balance the drive shaft assembly.
  • Drive Shaft, Aluminum for 1967-69 Camaro / Firebird
  • 3" OD 6061T aluminum x .125" wall tubing
  • 49 7/8" center to center on u-joints
  • Spicer 1310 series solid cross u-joints
  • 27 spline 5.5" long slip yoke fits Powerglide, TH350 and Saginaw transmissions
  • Balanced Assembly

  • Drive Shaft, Aluminum for 1982-2000 Camaro / Firebird
  • 3" OD 6061T aluminum x .125" wall tubing
  • 41 5/8" center to center on u-joints
  • Spicer 1310 series solid cross u-joints
  • 27 spline 5.5" long slip yoke fits Poerglide, TH350 and Saginaw transmissions
  • Balanced Assembly

1967-69 CAMARO / FIREBIRD Aluminum Drive Shaft 3.5" OD Aluminum .125" wall Drive Shaft 1350 series with Chrome Moly 5.5" Trans. Slip Yoke 4.0" OD Aluminum .125" wall Drive Shaft 1350 series with Chrome Moly 5.5" Trans. Slip Yoke
  • Drive Shaft, Aluminum for 1967-69 Camaro / Firebird
  • 3" OD 6061T aluminum x .125" wall tubing
  • 49 1/2" center to center on u-joints
  • Spicer 1310 series solid cross u-joints
  • 32 spline 5.5" long slip yoke fits TH400 and Muncie 32 spline output shaft transmissions
  • Balanced Assembly

1350 Series 3.5" OD Aluminum .125 wall Drive Shaft with 5.5" Transmission Slip Yoke
  • Choose 27 spline or 32 spline GM Transmission Slip Toke
  • Black Chrome Moly Slip Yoke
  • Specify length; center to center on u-joints (up to 57.5" center to center)
  • 1350 Series Solid Cross U Joints/
  • Slip Yoke Installed and Balanced Assembly
1350 Series 3.5" OD Aluminum .125 wall Drive Shaft with 5.5" Transmission Slip Yoke
  • Choose 27 spline or 32 spline GM Transmission Slip Yoke
  • Black Chrome Moly Slip Yoke
  • Specify length; center to center on u-joints (up to 57.5" center to center)
  • 1350 Series Solid Cross U Joints
  • Slip Yoke Installed and Balanced Assembly