Instruction & Order Forms


  Home > TOOLS & MISC >

Dana Rear Housing Case Spreader
Dana Rear Housing Case Spreader

Alternative Views:

Our Price: $169.95

Product Code: CSKIT

Our PEM Rear Housing Case Spreader is designed for use in Dana and Integral Housing applications only

step 1. To begin, adjust the spreader to fit the dowel holes of the particular Dana Spicer® housing you are working on. This is done by either manipulating the threaded adjuster, or for larger rear ends (D70 & D80), by changing the overall spread of the tool. The upper and lower bars have two sets of holes drilled in them allowing for adjustment to adapt to a variety of applications.
step 2. After the spreader is set into place, snug the adjuster just enough to allow the spreader to hold itself in place. Once you have the spreader set up, you will need to use a dial
indicator with a magnetic base across the opening of the housing.
step 3. Once you have everything set up, you are ready to spread the housing. You need to pay close attention to the dial indicator reading as it is possible to over-spread the housing. You should never spread the housing more than .015”. More than this can cause severe damage. In most cases you will still need to pry the carrier out of the housing – even with the spreader in place.When re-installing the carrier with the housing spread, you should still have to tap the carrier into place; the carrier should not drop freely
  • Can be used on Dana 30-80 Housings

  • Can be used for GM10 and 12 Bolt Housings by making custom pins from a 7/8 Fine Thread Bolt
  • This spreader is not compatible with Corvette Housings

  • Note: Will not work with Dana 35 with dowel pins under the cover.

    WARNING: Cancer

    And Reproductive Harm-

Share your knowledge of this product. Be the first to write a review »
It all started with a great idea and a little hard work. Today we're proud to provide quality products direct to your doorstep through an experience you'll enjoy. And most of all, we hope you'll enjoy the products as much as we do. Call or email us today to let us know what you think. We'd love to hear from you!